Memory expansion 1.5MB/2MB optional with RTC for AMIGA 500

Memory expansion 1.5MB/2MB for AMIGA 500 optional with RTC

• 1.5MB is “slow mem”. 1MB slow-mem can be disabled via jumper (0.5MB slow-mem remains).
• additional 0.5MB possible with soldering.
• Optionally with RTC – Real Time Clock
• The Amiga must be unscrewed for installation.
  For the 1.5MB slow mem, the Gary chip must be pulled out and placed on the adapter.
  For the additional 0.5MB chip mem, a track on the mainboard must be cut and a jumper soldered.
  You will need a steady hand and soldering skills for this. A clean cut of the trace is reversible by a jumper or solder point.
  ATTENTION: The Amiga can be destroyed by the soldering conversion. We assume no liability for improper soldering!
  
• An 8372A Agnus is required! (not always standard in Rev5 Amiga)
• The memory expansion is installed in the “trapdoor” below.

General information on the Battery Act (BattG)
Included is a battery, which is necessary for operation. In connection with the sale of this battery, we, as the distributor, are required by the Battery Act (BattG) to inform our customers of the following: Used batteries must not be disposed of in household waste. Consumers are required by law to bring batteries to a suitable collection point. You can also send your used batteries to our dispatch warehouse (CompuSys GmbH, Hattsmoor 22, 22417 Hamburg). Waste batteries contain valuable raw materials that are recycled. Batteries and rechargeable batteries must not be disposed of in household waste.
Pb for lead; Cd for cadmium; Hg for mercury.
These chemical signs signal that a certain limit quantity of the specified chemical substances in this battery type is exceeded:
HG: more than 0.0005 weight percent mercury
Cd: more than 0.002% by weight of cadmium
Pb: more than 0.004% lead by weight.
You will also find these instructions once again in the documents accompanying the goods shipment.